Furniture scanning
Furniture scanning is carried out to check what furniture Nattugla has found. You can adjust and add furniture yourself for the best possible accuracy. It is also possible to mark areas to be ignored, eg a TV.
Furniture scanning is carried out to check what furniture Nattugla has found. You can adjust and add furniture yourself for the best possible accuracy. It is also possible to mark areas to be ignored, eg a TV.
AMS is started per service recipient, in order to get as accurate a scan of furniture as possible.
It is important that the light is on in the room.
Log in to Nattugla Admin and click on
service recipient.
Click on the symbol to start scanning - you will get a warning
that the image will be saved for 7 days, if you choose to save the image.
It takes about 30 seconds to scan the room. You can close the window and
start new scans on several owls at the same time. Confirm prompts to start scanning.
When scanning is complete, a new window opens and furniture is marked.
You can change by pressing the blue square. by grabbing the dots that appear you can adjust.
Add ignore area - eg a TV
Add exit door and bathroom door
When you are satisfied, you can SAVE and possibly DELETE IMAGE. Furniture scanning will be intact, even if the image is deleted.
If there is no person in the room, when scanning is run, you can safely leave the image.
If you don't find the answer to your question, don't worry, we are here by your side.
Hepro : + 47 400 044 43
Easymeeting : +47 400 04 887
We see heroes
We support heroes